Crawl Space Moisture Control in Muncie, Indiana is one of the many services we offer related to crawl space repairs. Controlling water in a liquid state from entering the space under your home is handled with installing a dewatering system made up of French drains and sump pumps. We control high humidity levels with professional-grade crawl space dehumidifiers.
Featured Benefits:
Emotional Benefits:
Contact us today for more info on
Crawl Space Moisture Control cost.
Vents in your crawl space should always be closed and weather-protected. To begin with, open vents allow moisture to enter your crawl space. This creates an ideal environment for mold and mildew to develop.
The main advantage of a vented crawl space over an unventilated crawl space is that venting can help to reduce radon and moisture-related decay threats by diluting the crawl space air. In flood-prone places, such as hurricane-prone coastal zones, adding a ventilated crawl space may also make sense.
During the summer, these vents allow outside air to flow beneath the floor, minimizing moisture accumulation that causes mildew and damage. In the winter, when the air is dryer, the vents are sealed to prevent the crawl space pipes from freezing.
The typical cost of crawl space encapsulation is around $7,500. The cheapest option is $5,000, while the most costly option is $30,000. Several factors influence the pricing, including the size of your crawl space, its current condition, and the materials used.
When the temperature is decreased to 70°F (the average crawlspace temperature), the humidity level in the air rises to 100%. According to estimates, around 40% of crawlspace air enters the house. This has a huge impact on the quality of the inside air.
Installing a crawlspace dehumidifier is the most convenient way to keep moisture levels under control. With this system, your basement will be dryer, cleaner, healthier, and more energy efficient.
Yes. In your crawl space, a vapor barrier will be essential. Furthermore, a moisture barrier is the basic minimum of crawl space protection. A vapor barrier might save you money on major maintenance.
Yes, a plastic cover or vapor barrier is mandatory, especially in a crawl space with a dirt floor. Moisture will flow to the earth's surface if there is no vapor barrier, causing significant problems in the crawl space such as mold and perhaps structural problems. Plastic should be used to completely cover the floor.
The cost of installing a vapor barrier is between $2 and $4 per square foot, or between $1,200 and $4,000 in materials and labor. The average installation cost is $1.50 to $3.00 per square foot.
Every crawlspace that is enclosed requires a drying system. Although we prefer a dehumidifier, contractors frequently use the supply air strategy to dry your crawlspace. Supply air may do a decent job of drying out the crawlspace in certain homes.
Residents who install 15 SEER air conditioners, sealed crawl space systems, radiant barriers in attics, or more insulation may be eligible for a 10% federal tax credit up to $ 500.00 if they have not previously used them.
A dehumidifier can help prevent mold and mildew from growing in your crawl space, but it will not eliminate it after it has established itself. In fact, a dehumidifier can spread mold spores across the neighborhood and even into your household.
If properly maintained, your crawl space dehumidifier can last anywhere from 3 to 5 years.
Ensure that all gutters and downspouts are in good functioning order. Examine the walls under the ground for fissures. Examine for leaks near HVAC ducts, pipes, and other plumbing components and fixtures.
You can arrange an appointment or make an enquiry by phone or email, or get in touch to us via our contact form or clicking the button below.
Please take a moment to read answers to our most frequently asked questions about our services.
It's best to keep the moisture in your crawl area between 30% and 50% for maximum efficiency. When you need to keep your crawl space dry, a decent dehumidifier can assist, but make sure it maintains a healthy amount of moisture.
It's best not just for your house, but also for you, because mold spores develop when moisture levels are too high, causing allergies!
Ascertain that the crawlspace is well ventilated. Using sand, fill in any low spots in the crawlspace. Cover the earth beneath the crawlspace with a 6 mm or thicker layer of plastic. Cover the plastic with a layer of sand to keep it in place and absorb any excess moisture.
Approximately 26% increase in the relative humidity of the air in the crawl space (from 51 percent outside to 76 percent in the crawl space). Mold starts to grow at 60 percent relative humidity. Mold now has the perfect environment to develop in the crawl space, thanks to warm temperatures and organic substances.
For a tiny crawl area, a large room dehumidifier will suffice, but for a larger one, you may need to rent a commercial grade machine. Set the dehumidifier to 30 to 45 percent humidity and leave it running for several hours before checking on the space. It could take eight to ten hours to dry a moist crawl space.
A plumbing leak, water seepage from the surrounding soil (typically after heavy rain), or condensation are the most common causes of water in the crawl area. On chilly surfaces, such as ducts, moisture condenses and drips into the crawl space floor.
To see all the cities we provide crawl space waterproofing services, click on the dropdown below.
Albany, IN
Daleville, IN
Eaton, IN
Gaston, IN
Muncie, IN
Oakville, IN
Selma, IN
Yorktown, IN
Contact Us Today!
Encapsulations Down Under will do everything we can to ensure your experience with us is stellar.
Phone: 317-707-9444
Address:
4600 E 25 N
Muncie, Indiana 47303
Business Hours:
Mon - Fri 8:00 am - 9:00 pm
Sat - Sun Closed
Appointments Available
Encapsulations Down Under provides crawl space and basement waterproofing, crawl space encapsulation and foundation repairs to solve moisture and mold problems in Muncie, IN and surrounding areas.
Please see our most requested services listed below. If you have a flooded crawl space due to a lack of a french drain, sump pump, we can help! If you need of mold removal due to high humidity levels, we will make sure to your crawl space stays clean, dry and healthy!
An inexpensive method of dealing with moisture control issues in the basement or crawl space is installing a vapor barrier in the space. Designed to prevent moisture, water, and damp air from entering the home through the crawl space floor, crawl space vapor barriers are installed in crawl spaces. This helps to avoid the growth of mold and mildew, which can result in structural damage to your home as well as uncomfortably damp living conditions for your family!
One of the most critical phases in resolving moisture control issues is the removal of mold from the crawl space. Mold may quickly become a serious problem in a home, and those who take action to clean up and remediate the situation as soon as possible will have a better chance of preventing the problem from spreading. Getting rid of mold before it has a chance to spread throughout your entire home will save you both time and money in the long run.
Crawl Space Waterproofing is a need. In addition to protecting your property against water damage, it can also help you avoid the health and safety problems associated with mold!
Did you know YOU DON'T HAVE TO BE HOME for us to provide you with your 100% FREE crawl space inspection and report?
RECENTLY FEATURED ON
FOX59
Muncie Office:
Encapsulations Down Under
Phone: 317-707-9444
Email: info@encapsulationsdownunder.com
Address:
4600 E 25 N
Muncie, Indiana 47303
Hours:
Mon-Sun 8AM to 9PM EST
Indianapolis Office:
Encapsulations Down Under
Phone: 317-754-2884
Email: info@encapsulationsdownunder.com
Address: 3747 N Sadlier Dr
Indianapolis, IN 46226
Hours:
Mon-Sun 8AM to 9PM EST
Copyright © 2021 Encapsulations Down Under | Website Design & SEO by Disruhptiv Marketing & Media