Encapsulations Down Under

Get Help Right Now!

☎ 317-707-9444

Crawl Space Insulation Installation In Muncie, IN

Insulation installed in a crawl space in Muncie, IN

Muncie Crawl Space Insulation Installation

You may need to hire us for crawl space insulation installation in Muncie, Indiana due to wet insulation that can't be repaired, or you have a new home or addition being. You may even be looking to upgrade the insulation in your crawl space to improve your home's energy efficiency. Whatever the reason, we can help you install new insulation in your crawl space.


Featured Benefits:

  • Energy bills lowered
  • Longer-lasting heating & cooling system.
  • Improved comfort.
  • Better air quality in the home.


Emotional Benefits:

  • Stop worrying about allergies, asthma, or other respiratory problems. 
  • Save money for the future. 
  • Be a good steward of the planet by reducing carbon footprint.


Contact us today for more info on Crawl Space Insulation Installation cost.

What is Crawl Space Insulation?

Crawl Space Insulation is one part of a multi-step process to bring your crawl space up to code and keep your energy bills down. We develop a customized plan to address any potential energy loss problems in your crawl space, and then properly carry out this plan. This will leave you with a more comfortable and energy efficient home..

4 Signs You May Need Your Crawl Space Insulated In Muncie, Indiana

Below are some of the most common reasons you may need a insulation installed.

Cold floors in the Winter

High Energy Bills

Cold Drafts Coming from Floor

Excessive Furnace Cycles

Why do I need to Insulate my Crawl Space In Muncie, Indiana?

To pass a proper code inspection, a home must be properly insulated. Insulating your crawl space will help keep your energy bills down and improve the overall comfort of your home.

If you plan on selling your home soon, then you might as well insulate it now. This will allow you to enjoy the energy savings and improved comfort instead of just paying for someone else to have that opportunity.

Fiberglass Floor Insulation vs Foam Board Wall Insulation

The type of insulation and where to insulate is critical when insulating your crawl space. Fiberglass has been installed between the joists in VENTED homes for years. This is because the insulation should separate the cold air from the warm floor.

During a crawl space encapsulation, the barrier needs to be installed between the crawl space and the outside walls. Therefore, we use foamboard. It is extremely effective at keeping your home warmer and energy bills down.

How much does it cost to install crawl space insulation?

Crawl space insulation installation costs $0.30 – $2.50 per square foot for materials and $0.60 – $1.30 per square foot for labor. These prices will vary significantly depending on a number of things, including the type of crawl space insulation you choose.

Should I install a vapor barrier in my crawl space?

Yes. A vapor barrier is fundamental in your crawl area. A moisture barrier is also the basic minimum of crawl space protection. A vapor barrier might help you save money on expensive repairs.

What does R30 mean on insulation?

R30 is a standard insulation R-value, which measures a material's resistance to heat conduction. Insulation is rated R30 if heat conduction can be minimized by 97%.

Can you have too much insulation?

You may over-insulate your home to the point that it can't breathe. The purpose of house insulation is to keep the interior of your home as airtight as feasible. However, if it is too sealed with too many layers of insulation, moisture may become trapped between them. Mold starts to develop at this stage.

What is code for crawl space insulation?

The code specifies insulation criteria based on location, such as R-15/19. R-15 continuous insulation (board insulation) or R-19 cavity insulation is required on the inside or outside of the perimeter wall.

Is higher R-value better?

A higher R rating for insulation often equates to better temperature control and energy efficiency in your house. A higher R-value for insulation typically translates into a higher price. Check the R-value per inch of thickness published on the manufacturer's website for each kind and material of insulation.

What is a good R-value?

Standard external wall insulation needs range from R-13 to R-23, while ceiling and attic insulation guidelines range from R-30 to R-38.

What R value do I need in my crawl space?

R-11 (312") insulation under floors is suggested in warm climates, whereas R-25 (6"–8") insulation is recommended in cold climes. Install the insulation securely between the joists, with the paper vapor barrier facing the heated living room.

Should you insulate under your floors?

Insulate the floors above cold areas, such as vented crawl spaces and unheated garages, but don't forget to insulate beneath the flooring as well. This will assist you in getting the most out of your home's energy use. Insulation benefits from slab flooring that is built directly on the ground.

Does insulation in crawl space cause mold?

If there is moisture in your crawl space, the fiberglass insulation will absorb it and keep it like a sponge against your sub-flooring and floor joists. Mold may develop in, on, and through your insulation, as well as on the wood.

Should you insulate a crawl space ceiling?

It is vital to seal insulation and cover it with a vapor barrier to eliminate moisture and mold growth. If your crawl space isn't ventilated, insulate the crawl space walls rather than the flooring of the room above.

How much does it cost to insulate a 2000 square foot house?

Across the country, the total cost of insulating a 2,000 square foot home, including labor, supplies, and installation, ranges from $2,700 to $3,300. The average cost of a Do-It-Yourself project ranges from $700 to $1300.

Got a Question? We’re Here to Help.

You can arrange an appointment or make an enquiry by phone or email, or get in touch to us via our contact form or clicking the button below.

CONTACT US TODAY

Frequently Asked Questions

Please take a moment to read answers to our most frequently asked questions about our services.

  • What type of insulation should be used in a crawl space?

    Rigid foam insulation board is the best type of insulation for crawl spaces. Instead of placing foam insulation between floor joists in the crawl area, the foam board is installed against the foundation walls of the crawl space.

    It's best not just for your house, but also for you, because mold spores develop when moisture levels are too high, causing allergies!

  • Is insulating crawl space worth it?

    The short answer is that if you want to make your home more energy efficient, you should insulate the crawl space.

  • How thick should crawl space insulation be?

    You're in luck if your winter temperatures rarely drop below freezing. The job is done with six-inch-thick R-19 fiberglass batts inserted between floor joists, as well as meticulous moisture control and mold avoidance. Best of all, it's inexpensive, costing just $1 per square foot.

  • Is r19 insulation good for crawl space?

    Your crawl space will be well insulated with six-inch R-19 fiberglass batts fitted with the paper moisture guard facing the living area (and hung firmly without compressing).... Your crawl space is protected and moisture-free with this mix of vapor barrier and fiberglass insulation.

  • How often should you replace insulation in crawl space?

    How often should crawl space insulation be replaced? Similarly, when the conditions are ideal, crawl space insulation should last up to 40 years. Crawl space insulation may need to be renewed as soon as 10 years after installation in moist environments.

Cities We Proudly Service

To see all the cities we provide crawl space waterproofing services, click on the dropdown below.

  • Service Areas

    Albany, IN

    Daleville, IN

    Eaton, IN

    Gaston, IN

    Muncie, IN

    Oakville, IN

    Selma, IN

    Yorktown, IN

Check Out All of Our Services

Contact Us Today!

Encapsulations Down Under will do everything we can to ensure your experience with us is stellar.

CALL US NOW

Request A FREE Estimate Today!

Request a Free Estimate Form

24-Hour Emergency Service

Contact Information

Address: 4600 E 25 N
Muncie, Indiana 47303

Business Hours:

Mon - Fri 8:00 am - 9:00 pm

Sat - Sun Closed

Appointments Available

CALL NOW

Servicing Muncie, IN and Nearby Cities

Encapsulations Down Under provides crawl space and basement waterproofing, crawl space encapsulation and foundation repairs to solve moisture and mold problems in Muncie, IN and surrounding areas.

Related Services in Muncie, IN

Please see our most requested services listed below. If you have a flooded crawl space due to a lack of a french drain, sump pump, we can help! If you need of mold removal due to high humidity levels, we will make sure to your crawl space stays clean, dry and healthy!

Crawl Space Vapor Barrier Installation

An inexpensive method of dealing with moisture control issues in the basement or crawl space is installing a vapor barrier in the space. Designed to prevent moisture, water, and damp air from entering the home through the crawl space floor, crawl space vapor barriers are installed in crawl spaces. This helps to avoid the growth of mold and mildew, which can result in structural damage to your home as well as uncomfortably damp living conditions for your family!

Crawl Space Mold Remediation

One of the most critical phases in resolving moisture control issues is the removal of mold from the crawl space. Mold may quickly become a serious problem in a home, and those who take action to clean up and remediate the situation as soon as possible will have a better chance of preventing the problem from spreading. Getting rid of mold before it has a chance to spread throughout your entire home will save you both time and money in the long run.

Crawl Space Waterproofing

Crawl Space Waterproofing is a need. In addition to protecting your property against water damage, it can also help you avoid the health and safety problems associated with mold!

CALL US TODAY
Share by: